Missing Operation Inspection Machine

Missing Operation Inspection Machine

SC-YT Missing Operation Inspection Machine is to check whether any operation is missed after turning of inner/outer rings. Detect Miss Bearing Machine can quickly,accurately and automatically detect and separate any defected ring. Its key parts are all imported from Japan,with featured of energy-saving ,low noise and pollution-free.

The detection device for missing bearing rings includes a storage hopper. The chassis of the storage hopper is a rotating disk driven by a motor. The side wall of the storage hopper is provided with a discharge port which is flush with the rotating disc to output the bearing ring. The outer side wall of the storage hopper is fixedly connected with a first slide rail with an opening at one end, and the other end of the first slide rail inclines downward, A first opening equal to the large flange of the bearing ring is arranged on the bottom plate of the first slide rail, and a second sliding rail is arranged below the first opening. Two inner walls of the second sliding rail are respectively provided with a support plate, and the distance between the two support plates is equal to the diameter of the small flange of the bearing ring. The bottom plate of the second slide rail is provided with a second opening corresponding to the gap between the two supporting plates, The second opening is equal to the large flange of the bearing ring. The utility model has reasonable structure, can detect whether the bearing ring is missed processing, and classify the bearing rings which have missed the same step.

Main technical parameters：

Inspction Size:Φ10-Φ100

Work Pressure:≥3.0Mpa

Power Voltage:380V

Inspection Cycle:1pc/s